How to Sand your floors by yourself | from Start to End

 

As far as installing quality flooring is concerned, it is also extremely significant to implement the right steps to make them look new-like forever, agree? In this context, we would like to acknowledge you with the thing that floor sanding and polishing are the two affordable and most effective processes to do so.

On a serious note, floor sanding is more recommendable if you are planning to do it by yourself as the process is less complicated than floor polishing. But even if you would want to invest in a healthy and guaranteed option then contact the best experts of floor sanding in North Sydney anytime. Visit the website to learn more about them.

 

 Benefits of Floor Sanding:

1.                   Helps in pest control

2.                  Diminish the possibility of sprinters

3.                  Elevate the sturdiness of the floors

4.                  Better for allergy sufferers

5.                  Cost-effective option  

 

Tools you may require

1.                   Essential tools: Drum Sander & Small disk sander also known as edging sander

2.                  Other Less essential tools: Different grits of sandpaper, Vacuum cleaner, hammer, Nail punch

3.                  Safety gears: Dust mask, Rubber or protective gloves and shoes, Ear muffs or plugs

4.                  And obviously a Trash bin.

 

 

Steps of Floor Sanding

Step 1: Clean up

The experts of floor polishing in North Sydney recommend, whether you are preparing for an at-home floor sanding or floor polishing, it is extremely significant to first clean up the floors before starting ahead.

Cleaning mostly removes all the lurking dust and dirt off the floors and helps simplify further processes. It also helps the eyes channelize which places would require more sanding and vise versa.

 

Step 2: Start with Sanding (Using Drum Sander)

Start with sanding using the drum sander (which is particularly for sanding the room’s space excluding the corners) and then proceed by sanding the edges using a small disk sander.

While working with a drum sander you need to be cautious as no extra pressure is required simply move the equipment to and from, diagonally, horizontally, and vertically around the floors until perfectly sanded.

 

[Bonus Tip: On average, a room of 140sq. Ft. takes around 4-5 hours]

 

Step 3: Start with Sanding (Using Disk or Edging Sander)

Once you are done with the drum sanding, now let’s move on to the edges.

For sanding the edges, you may require using an edging or small disk sander.

Use sander pads to stick the disk sander or the sandpaper, to avoid any injuries to the hand. Also, make sure to wear protective gloves during the entire sanding process. Move the sandpaper to and from in a somewhat aggressive manner but, remember to not go too harsh on the surface or it may hamper the appearance of your floors.

[Bonus Tip: Only use sandpaper with the grains of the wood/coarse sandpaper in the start and then conclude with less coarse sandpaper]

 

So, these were the steps of sanding your floors the right way. If you found the blog post beneficial and plan to try it sooner then, feel free to share your experience by writing us in the comment section below.

For more tips and updates on Flooring, visit Darcy’s Floor Sanding, a professional company catering to the needs of flooring installation, refurbishment, repair, and much more for over 15 years at the best possible price.

Visit the website anytime and get started.